Introduction:
This series of injection type / atmospheric pressure gravity type dual-use filling machine is a kind of high-tech products developed by our company. It can be applied to different viscosity of water agents, fluids, washing products, parts of the material contact part, all using stainless steel materials, with rust-resistant corrosion resistance. Widely used in food, cosmetics, medicine, fats, daily chemicals, detergents, pesticides, chemicals and other products filling. Using linear filling method, it can be used for different types of solution filling. No additional spare parts are required.
Features:
1, materials in contact with 316L, 304 stainless steel materials, in line with GMP requirements;
2, the entire machine uses compressed air as a power source, the machine operates without collision and hard friction; Suitable for use in situations with explosion-proof requirements;
3, using a fixed volume measurement and piston push rod structure, the equipment's filling accuracy is high, and the error is small(error ≤ ± 0.5 %);
4, there is filling quantity adjustment handle, filling speed can be arbitrarily adjusted;
5, with automatic suction, quantitative filling, uniform output, filling quantity and speed can be arbitrarily adjusted and other practical functions;
6, fill the mouth to use the cylinder valve or mechanical valve; There is an anti-drip plug in the filling mouth to prevent filling mouth pulling wire and dropping material;
7, the components through the clamping connection, facilitate the assembly of disassembly, cleaning, maintenance, assembly;
8, machine settings[ Manual] File and[ Automatic] File,[ Manual] Through foot control filling,[ Automatic] The machine is continuously filled.
Principle: The piston in the cylinder is reciprocated by the upper and lower motion of the cylinder, so that the front Chamber of the cylinder produces negative pressure. When the cylinder moves down, pull the piston down, and the front cavity of the cylinder produces negative pressure. The material in the bucket is inhaled by the atmosphere into the cylinder and enters the cylinder through the one-way valve entering and leaving. When the cylinder moves up, push the piston forward and squeeze the material. The material enters the empty bottle to be filled through the one-way valve in the discharge joint to complete one filling.
型號 | 料斗容量L | 灌裝范圍ml | 生產(chǎn)能力（次/分） | 料缸內(nèi)徑mm | 驅(qū)動壓力Mpa | 外形尺寸mm |
40 | 45 | 15-150 | 4-30 | 40 | 0.2-0.45 | 500*500*1600 |
60 | 45 | 50-300 | 4-30 | 60 |
80 | 45 | 100-500 | 4-30 | 80 |
100 | 45 | 200-1000 | 4-30 | 100 |
